Signalling Pyrotechnic Products
|
Products |
Types flarescolours |
Illuminating time(s) |
Burning time(s) |
No. of stars per product |
Ejection altitude(m) |
Angle offire
(deg) |
Visible distance
(not less then) |
Packing |
|||
|
Daytime |
Nighttime |
In boxes (pcs) |
In packing bag
(pcs) |
In cases (pcs) |
|||||||
| 16.5 mm rocket for launcher | White, green, red |
5 ... 8 |
1 |
> 60 |
2 |
2 |
24 |
56 boxes |
|||
| 26 mm pistol | Illuminating (white) |
6.5 ... 9.5 |
1 |
> 90 |
45 - 60 |
2 |
7 |
15 |
36 bags |
||
| Signalling cartridge | Signalling (red, green) |
6.5 ... 9.5 |
1 |
> 90 |
80 - 90 |
2 |
7 |
15 |
36 bags |
||
16.5 mm Flares for Pen-type Launchers
16.5 mm Flares are designed as signal means for signalization in night and day conditions.
SPECIFICATION:
(click photo to enlarge it)
| 1. Dimensions | Cartridge | Pen-type launcher |
|---|---|---|
| -overall height,mm | 35 |
120 |
| -diameter, mm | 20 |
12 |
2.Star colour |
green,white or red |
|---|---|
3.Burning time, s |
from 5 to 8 |
4.Ascent height, m |
over 60 |
5.Visibility of the signal - in day-time, km - at night, km |
not less than 2 not less than 8 |
6.Stability |
The article’s design and the production process ensure the stability at the time of transportation with all kinds of transport means. |
26 mm Pistol Fired Signal and Illumination Cartridge
(click photo to enlarge it)
I.PURPOSE
26 mm Pistol Fired Signal and Illumination Cartridges are
intended for signalization in night and day conditions and for ground area illumination.
II.COMPONENTS:
1. Cardboard cartridge case
2. Fulminating detonator
3. Impulse charge
4. Stars
5. Metallic cap
III.SPECIFICATION
1.Dimensions -overall height, mm -outer diameter, mm |
79 26.6 |
|---|---|
| 2.Types and colour -signal -illuminating -one-star, two-stars |
green or red white |
| 3.Burning time, s | from 6.5 to 9.5 |
| 4.Stars ascent height, m | over 90 |
| 5.Visibility of the signal -in day-time, km -at night, km |
not less than 2 not less than 7 |
| 6.Angle of cartridges firing -for signal,degrees -for iluminating, degrees |
from 80 to 90 from 45 to 60 |
| 7.Area of illumination at night, m² | over 100 |
| 8.Stability | The article’s design and the production process ensure the stability at the time of transportation with all kinds of transport means. |
| 9.Shelf life by keeping in storage conditions | 10 years, if kept in the producer packing |
IV.PACKING
- 15 cartridges are packed in one cardboard box, the box is placed in a air-tighten polyethylene bag,
36 polyethylene bags are arranged in a wooden case (totally 540 pcs cartridges).
- Wooden case:
- Dimensions, mm 720x550x290
- Gross weight, kg 39
30 mm JET SIGNAL AND ILLUMINATION CARTRIDGE
 |
(click photo to enlarge it)
I. DESTINATION:
30 mm Jet Signal and Illumination Cartridge is intended for colour signalling at any time of day and night and for ground area illumination.II. COMPONENTS:
1. Launching tube
2. Ignition device
3. Jet part
4. Flare
5. Limiter
6. Pressing cap
7. Identification cap
III. SPECIFICATION:
| 1. Dimensions: | overall height, mm outer diameter, mm |
230 32 |
| 2. Types | One-star: |
- signal: green or red - illuminating: white |
| Two-stars: | - signal: green or red | |
| 3. Burning time, s | - one-star,
signal - two-stars, signal - one-star, illuminating |
not less than 9 not less than 8 not less than 6 |
| 4. Stars ascent height - red, green, m | not less than 150 | |
| 5. Distance of stars flight- white, m | not less than 350 | |
| 6. Visibility and distinguishing of the signal: |
- in day-time, km - at night, km |
not less than 2 not less than 10 |
| 7. Stability: The article’s design and the production process ensure the stability at the time of transportation with all kinds of transport means. The articles are moisture resistant. | ||
| 8. No-failure performance: The article has no-failure performance at percussion primer (scratch type) actuation by abrupt pulling of the cord. | ||
| 9. Shelf life by keeping in storage conditions – 10 years | ||
IV. PACKING:
- 5 pcs in a air-tight polyethylene bag;- 39 pcs polyethylene bags (paper wrapped) in a wooden case.
40 mm JET SIGNAL CARTRIDGE FOR GAS ALERT
 |
(click photo to enlarge it)
I. DESTINATION:
40 mm Jet Signal Cartridge is intended for sonic and light signalling of gas alert.
II. COMPONENTS:
1. Launching tube
2. Ignition device
3. Jet part
4. Sonic-illumination unit
5. Pressing cap
III. SPECIFICATION:
1.Dimensions: |
- overall height, mm |
252 |
| 2. Sonic effect duration, s | - not less than 11 | |
3. Burning time of signal stars, s |
- not less than 5 | |
4. Ascent height of stars, m |
-not less than 200 at angle of launching 85-900 |
|
5. Range of sonic effect and stars visibility, m |
not less than 800 |
|
| 6. Stability:The article’s design and the production process ensure the stability at the time of transportation with all kinds of transport means.The articles are moisture resistant.
|
||
| 7. No-failure performance The article has no-failure performance at percussion primer (scratch type) actuation by abrupt pulling of the cord or by feeding of electricity to the electrical igniter.
| ||
8. Shelf life by keeping in storage conditions – 10 years
|
||
IV. PACKING
- 3 pcs in a air-tight polyethylene bag;
- 28 pcs polyethylene bags (paper wrapped) in a wooden case.
40 mm JET ILLUMINATION CARTRIDGE WITH INCREASED RANGE
I. DESTINATION:
40 mm Jet Illumination Cartridge is intended for increased range of ground area direct illumination.
II. COMPONENTS:
1. Launching tube
2. Flare with parachute
III. SPECIFICATION:
Dimensions:
- overall height, mm 210
- outer diameter, mm 41
2. Burning time of signal stars, s not less than 20
3. Range of stars visibility, m not less than 400
4. Stability:
The article’s design and the production process ensure the stability at the time of transportation with all kinds of transport means.
The articles are moisture resistant.
5. Shelf life by keeping in storage conditions – 10 years
IV. PACKING
- 24 pcs in a cardboard box,
- 4 cardboard boxes in a wooden case.